Videomaker award logo
Digital Camera World Best in Show award logo
XSW-D PORTABLE LAVALIER SET
XS Wireless Digital Portable Lavalier Set. Användarvänligt, trådlöst one touch-ljudset med XSW-D-sändare på 3,5 mm (1/8”), XSW-D-mottagare på 3,5 mm (1/8”), ME2-II-mygga med clip on-funktion, spiralsladd på 3,5 mm (1/8"), cold shoe-fäste, bältklämma och laddsladd med USB-A till USB-C
SEK 3,200.00
inkl. moms
Article No. 508488
XSW-D PORTABLE LAVALIER SET
SEK 3,200.00
inkl. moms

Användarvänligt, trådlöst one touch-ljudset som använder en digital överföring för att sömlöst länka ljudkällor. Denna eleganta lösning är utrustad med en ME2-II -mygga och gör det enklare än någonsin förr att spela in dialog med en DSLR-kamera, samtidigt som en tillförlitlig anslutning upprätthålls.

  • Användarvänlig one touch-funktion

  • 2,4 GHz digital överföring för global drift

  • Räckvidd på 75 m (250 fot) i optimala förhållanden

  • Upp till 5 timmars batteritid vid en enda laddning

  • Växla mellan olika sändare länkade till en mottagare

  • Konfigurera valfri kombination av sändare och mottagare

  • Inaktivera ljudet från antingen sändare eller mottagare

Välkommen till den trådlösa ljudvärlden

Trådlöst innebär ständig närvaro. XS Wireless Digital ger ett fantastiskt ljud och är ett idealiskt verktyg för att spela in dialog för både filmare och mobila journalister. XSW-D är kompatibel med alla DSLR- eller spegelfria kameror och erbjuder verkligen "plug and play" med sin ME 2-ii lavalier-mikrofon och 3,5 mm-kontakt. Nu kan du förenkla ditt arbetsflöde och få ett rent och tydligt ljud utan att krångla med komplexa installationer och uppkopplingar.

Välkommen till den trådlösa ljudvärlden

Det blir inte enklare än så här

Varje XS Wireless Digital-sändare och -mottagare har en enda knapp. Tryck för att slå på och länka ihop sändare och mottagare, tryck kort en gång för att tysta ljudet och håll inne knappen för att stänga av. Dessutom har båda enheterna en varsin LED-lampa som visar att uppkopplingen är bra eller att det är dags att ladda batteriet. Det finns inga krångliga menyer eller inställningar att pilla med. Lika enkelt som att koppla en mick direkt till din kamera, fast med mycket mer flexibilitet.

Det blir inte enklare än så här

Digitalt för global användning

XS Wireless Digital använder samma 2,4 GHz-frekvens som wifi och kan användas fritt i hela världen. Du behöver inte söka efter tillgängliga frekvenser, eftersom systemet gör jobbet åt dig. Detta betyder att du kan ta XS Wireless Digital med dig överallt utan att bekymra dig för statiska störningar eller dropouts. Bara tryck på knappen och spela in!

Digitalt för global användning
Fan Images

Newsletter subscription

Reviews
Be the first to write a review.

Specifications
Vad finns i lådan
  • XSW-D-sändare på 3,5 mm (1/8”)
  • XSW-D-mottagare på 3,5 mm (1/8”)
  • ME2-II-mygga med clip on-funktion
  • Spiralsladd på 3,5 mm (1/8")
  • Cold shoe-fäste
  • Bältklämma
  • Laddsladd med USB-A till USB-C

Training
Support
Contact Us
Product Support Phone

+46 0840050400


FAQ
  • How do I set up XS Wireless Digital for the first time?
    XS Wireless Digital systems come pre-paired from the factory, so you can take a new system out of the box, power it up and get right to work

  • How do I select a channel / frequency?
    XS Wireless Digital automatically selects its own frequency, and will automatically switch to a new frequency if interference is detected

  • How many systems can I run simultaneously?
    Up to five (5) systems can be used simultaneously.

  • How far can XS Wireless Digital transmit?
    Up to 75m (250 ft) under ideal operating conditions.

  • Will XS Wireless Digital warn me if I'm getting out of range?
    Yes. Both transmitter and receiver indicators will flash green and red to indicate you're almost out of range.

  • What is XS Wireless Digital's operating time?
    XS Wireless Digital provides up to 5 hours of operating time.

  • How do I re-charge my system's batteries?
    XS Wireless Digital's built-in lithium ion batteries can be charged by connecting the included charging cable to any USB-A equipped external charging device or computer.

  • Do I need to set my system's input and output levels?
    No, input and output levels have been pre-set to optimum levels - simply plug and play.

  • What do the different indicator colors mean when I power up my system?
    Battery status is indicated by color during power up.
    • Green: over 75% charge remaining
    • Yellow: less than 75% charge remaining
    • Red: less than 5% remaining
    • Blinking red: too low to operate


  • How do I monitor my remaining battery time during use?
    During operation, remaining battery time is shown on the indicator as follows:
    • Red & green blinking: less than 15% charge remaining
    • Rapid blinking, red only: less than 5% remaining


  • Can I buy additional components with different connectors to expand my system?
    Yes, you can purchase additional transmitters or receivers - sold separately - and then pair them to work with your existing system.

  • How do I pair an additional component to my existing system?
    Start with both devices powered off. Press and hold the power buttons on selected transmitter and receiver for (minimum of) 5 seconds to enable pairing on the devices.  Both indicators will flash green and red, then turn solid green when pairing is complete.

  • How many transmitters can I pair with my receiver?
    Up to four transmitters can be paired with a receiver. Note, only one transmitter may be used at a time.

  • Can I send audio from one transmitter to multiple receivers simultaneously?
    No, XS Wireless Digital creates a point-to-point paired connection between a single transmitter and single receiver.

  • The Portable ENG Set comes with two transmitters and one receiver. Can I use both transmitters simultaneously?
    No, only one transmitter can be connected to the receiver at a time. Both transmitters have been pre-paired to the receiver from the factory, enabling plug and play operation with either device.

  • Do I need a license to use this system?
    No, XS Wireless Digital operates in the 2.4GHz frequency range for worldwide license-free use.

  • I lost an accessory. Can I replace it?
    Yes, all XS Wireless Digital accessories are available separately. You can purchase additional transmitters and receivers, belt clips, camera adapters, and connecting cables as needed.

  • What kind of microphones can be used with the XLR plug-on transmitter?
    Any dynamic microphone (or battery-powered condenser microphone) will work with the XLR plug-on.

  • What kind of microphones can be used with the 3.5mm Mini Jack transmitter?
    The 3.5mm Mini Jack transmitter is compatible with most common lapel mics and headmics.

  • Will the Instrument Set work with all styles of guitar and bass pick-ups and plug-styles?
    The 6.3mm (1/4 inch) jack connector has a 90-degree range of motion, allowing it to be plugged into a wide range of instruments with side, top or even recessed input jacks.  In the event that the transmitter does not fit into a specific instrument, an extension cable is provided, which allows the transmitter to be clipped to the strap.

  • Can I use the Ci1 instrument cable with the 3.5mm input on the Mini Jack Transmitter?
    No, the Ci1 instrument cable (included in analog XS Wireless and evolution wireless instrument sets) is not compatible with XS Wireless Digital. For instrument connections via 6.3mm (1/4 inch) jack, please use the dedicated instrument transmitter.

  • Can I connect XS Wireless Digital to my computer via the USB cable?
    XS Wireless components can be charged via a computer's USB port, but audio is not passed to or from a computer via USB.

  • My audio is distorted, what should I do?
    In the unlikely event that your audio distorts, reduce the input level on your mixing board, DSLR camera or other external device. If your equipment offers choice of mic or line level, please select line. For devices offering mic level only, reducing input sensitivity will improve results.  XS Wireless Digital has been designed to provide a clean, robust output signal, but you may need to adjust your external device the default settings on to achieve the best results.

Nedladdningar

  • Transportinformation för litiumjonbatterier
    • Transport information for Lithium-Ion batteries (570 KB) Download

      Revision Date: 2020-02-09 Revision Number: 1.0

  • Snabbguide
    • Quick Guide XS Wireless Digital (1.3 MB) Download

  • Instruction Manual
    • Instruction manual - XS Wireless Digital (HTML) Download

      Interactive instruction manual for all products of the Sennheiser XS Wireless Digital series.

    • Instruction manual - XS Wireless Digital (PDF) (10 MB) Download

  • Spec Sheets
    • Product Specification - XS Wireless Digital Portable Lavalier Set (160 KB) Download

    • Product Specification - XSW-D Portable Lav Mobile Kit (600 KB) Download

  • EU-försäkran om överensstämmelse
    • EU-försäkran om överensstämmelse XS Wireless Digital (580 KB) Download

  • Säkerhetsanvisningar och regulatorisk information
    • Safety instructions, specifications and manufacturer declarations - XSW-D series (860 KB) Download

    • Specifications and manufacturer declarations - XSW-D Pedalboard Receiver (680 KB) Download